Go to google and search 'lcdproc'. It's done and they have a linux
driver.

> -----Mensaje original-----
> De: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] En
> nombre de arpit
> Enviado el: mi=E9rcoles, 16 de enero de 2002 21:34
> Para: PICLIST@MITVMA.MIT.EDU
> Asunto: [EE]: Multiple lcd displays on 1 parallel pors
>=20
> Hi, I have a project which calls for a 4x20 lcd display on the
parallel
> port. I only have 2 2x20 displayes. OI was wondering. Theparallel
> schematic has 3 enable output lines E, E1 and E2. For one 20x2 lcd one
> should just use the e line, but bgger lcds have more enable lines.  I
was
> wondering whether I could have 2 lcds hooked up to exactly the same
pins
> except to different enable lines. If so, which should I use out of the
3.
>=20
> THanks.
>=20
>=20
> Arpit
>=20
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads