two ways can be done.

1. make unused pins inputs and ground them.
2. make unused pins output and do not connect to any where
   do not ground output pins.


Andre Abelian




I will have several unused pins on my 16F877

Should the unused pins be set as inputs or outputs and should they be
tied
directly to GND or do I use a resistor.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu