Set them as outputs.

-----------------------
Rudy Rudy
rudy@rudyrudy.com
http://www.rudyrudy.com
-----------------------

> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of WEBB,TIM (A-Sonoma,ex1)
> Sent: Wednesday, January 16, 2002 11:49 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: [PIC]:What is the correct way to terminate unused pins 16F877
>
>
> I will have several unused pins on my 16F877
>
> Should the unused pins be set as inputs or outputs and should they be tied
> directly to GND or do I use a resistor.
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu