how much Warp13 cost Mr. Somsundaram are atisfied with your programmer & and its associated sofware. whether it works with MPLAB in india how to get this programmer can i get PIX programming software which drives KDM programmer for 16F84 satisfactorily due hard dics damage i lost the pix programmes I dont remember the gentelmans email addreess who supplies me this siosware can anybody helpme ihav hardware of JDM programmer which is in working condition akbar patil ----- Original Message ----- From: "Somasundaram Meiyappan" To: Sent: Sunday, January 13, 2002 5:42 AM Subject: [PIC]: How to program/read a 16F628 using Warp13? >>>I am resending this message as it bounced the last time around.(Actually, did not add the subject tags correctly)!<<< Hi all, I tried to read the contents of my new 16F628, using my new Warp13 programmer, by placing the Pin1 of the chip in the Pin1 of the ZIF socket in the programmer. But the data that was read back looks similar to the data that would have been read back when no chip is inserted into the socket (all data -program/eeprom/config bits = 0). I made sure that the "Force ISP" is not set. I also tried using MPLAB to read the chip which also gave me the same result. Trying to program the chip did not succeed either. Can anyone tell me how to program/read my 16F628 ? Any help is appreciated. Just a note: the programmer programs a 16F877 without any problems at all. Thanks and Regards, Somasundaram. -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics