That's a really clever little tool Peter,
thank you very much. :o)
-Roman

Peter L. Peres wrote:
>
> A simple probe consists of a single 1N4148 (better 1N23) diode with a 5cm
> wire on one end and a connector mating with the scope probe tip on the
> other (turned IC socket). Set the probe to 1Meg. You may have to add a
> smaller resistor between the probe tip and ground to make fast pulses
> visible. The scope will be used on 10mV/div probably. Do not touch
> directly with circuit, 1-2cm away from tx antenna or tx booster (-;)
> should work.
>
> The field strength meter will be useful, for the transmitter only
> probably. This is also true for the probe.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.