Sean,

Do y'all have a website we can see some of your handy work, with example
pricing maybe?  Does it only take 200 to make tooling worth while?

-- Mitch

On Wed, 9 Jan 2002, Sean Alcorn - Avion Sydney wrote:

> on 9/1/02 11:36 AM, Vitaliy Maksimov at piclist2001@HOTMAIL.COM wrote:
>
> Hi Vitaliy,
>
> > Does anyone has experience making their own plastic cases.  Something
> > relatively small (2x5 inches), with a couple of openings for the 7-seg
> > display, three or four buttons, and a LED.  And, how difficult is it to modify
> > an existing case - I suppose I could drill the round holes, but what about the
> > square/triangle openings for the display and the buttons?  If the effort isn't
> > worth it, how much should I expect to pay to have 100-200 of those cases made
> > by someone who has the right equipment?
>
> I have a factory in Taiwan, and I design all our plastic cases. Do you think
> you will ever need more than 200 of these? If yes, it might be worth tooling
> up for your own case.
>
> What is your budget for the 200 cases?
>
> Regards,
>
> Sean
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics