In the Configuration window, did you check the box marked "Enable Debug
Mode" (Or something like that)?

This is required to program the debug code into the Program Memory space.
Otherwise just your program will be loaded and will run OK, but no debugging
functions will work.

Kirk

>
> I am currently unable to get my ICD to step through code or run
> anything.  It can program and read.  The self test says "OK"
> but it says
> there is no debug module.  The proper chip is selected, and the actual
> chips appear to work.  I have tried three host circuits and
> three chips.
>
> I can program, but once I hit "run" or "step" I get a "error
> performing
> operation" box.
>
> I looked everywhere I can but I can't find a remedy.
>
> There doesn't seem to be anyone or anything answering
> Microchip's phone line.
>
> Has anyone had these problems before?
>
> TIA
>
> Jeff
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads