Yeah, I'm considering it.  But, I haven't been able to get the HEX files
from PICC to run in my 16F877.  BasicMicro's IDE will download the HEX, but
the pic is dead after that, until I download another program.

I was so surprized what the Basic Stamp could do!  I had all the FAT16 code
required to create and append a file with room to spare.

----- Original Message -----
From: "Randy Glenn" <picxpert@COGECO.CA>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Sunday, January 06, 2002 2:38 AM
Subject: Re: [PIC]: New Subscriber & Project


> Cool. Nifty. Neat-o.
>
> With a Basic Stamp!?!?!
>
> You know that if you get it to compile in the Hitech C compiler and change
> the schematic a bit, you could win a contest, right?
>
> http://www.montanadesign.com/contest.html
>
> -Randy Glenn
>
> Measure twice, cut once, curse, discard. Repeat.
> =================================================
>     PICxpert@cogeco.ca - PICxpert@yahoo.com
>            http://picxpert.dyndns.org
>     Not that the site works yet, of course...
> =================================================

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu