----- Original Message -----
From: Bob Barr <bbarr@CALIFORNIA.COM>
2) Handshaking -

>[Note: If you change the settings in Hyperterminal, you need to exit
>and restart Hyperterminal to get the new settings to take effect. I'm
>not sure why this is necessary but it just seems to be the case. There
>may be another method to accomplish this but I don't know what it may
>be.]

Certain versions of Hyperterminal are a bit cranky; i.e. not resetting the
UART when changes are made, locking up, etc....  Most of the time
disconnecting and reconnecting (after new changes) sets the UART (telephone
icon left screen).

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics