Hon? Hon? Young lady I appreciate the honor you do me! About the fix, Hurrah and a Tiger for you! Happy New Year! Kathy Quinlan wrote: > > >----- Original Message ----- >From: "Thomas C. Sefranek" > >>I'd Guess you have the charge pump clock clocking the "data". >> >>If it doesn't offend you I suggest checking the wiring to look for >>missing ground or an EXTRA ground to a charge cap that is NOT supposed >>to be there. >> > >checked that first hon, spent 2 days on this fault :o( > >but the new chip fixed the fault, so I am guessing it is the old chip :o) > >Regards, > >Kat. > > >____________________________________________________________________________ > /"\ ASCII Ribbon Campaign | K.A.Q. Electronics > \ / - NO HTML/RTF in e-mail | Software and Electronic Engineering > X - NO Word docs in e-mail | Perth Western Australia > / \ | Ph +61 419 923 731 >____________________________________________________________________________ > > >----- Original Message ----- >From: "David VanHorn" >To: >Sent: Friday, December 28, 2001 11:55 PM >Subject: Re: Strange errors with max232 chip > > >>Any chance you're whanging the data out pin in the routine that feeds >> >bytes > >>to the uart? >>That might account for the glitch. It seems suspiciously consistant. >>That is a lot of time though, a bit-time, at any baud, is a long time to a >>micro. >> >>Do you set up the port once and leave it, or are you re-configuring the >> >DDR ? > >>-- >>http://www.piclist.com hint: PICList Posts must start with ONE topic: >>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads >> >> > >-- >http://www.piclist.com hint: PICList Posts must start with ONE topic: >[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > -- * | __O Thomas C. Sefranek tcs@cmcorp.com |_-\<,_ Amateur Radio Operator: WA1RHP (*)/ (*) Bicycle mobile on 145.41, 448.625 MHz ARRL Instructor, Technical Specialist, VE Contact. http://hamradio.cmcorp.com/inventory/Inventory.html http://www.harvardrepeater.org -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads