I looked at a digital pots (Xicor and Dallas) a few years ago. I didn't use them because the wipers could handle very little current. If I'm right, you will probably have to use a transitor after the Digital Pot - your required resistance may change. (DS1267) regards, Andrew > > > >Hi, > >I am trying to build a PIC IR Proximity Detector, the bascic TX circuit > >is figure 2 on this page >>> > >http://www.rentron.com/Infrared_Remote_Control.htm > >If I add a small resistor (10-330 ohms) between the IR led and gnd, > >it changes the distance the RX circuit detects a reflection from > >(10cm -120cm) > >So, I thought if I add a digital pot instead of manually changing > >the resistor, > >I could make a rudimentary IR Proximity Detector. > >Problem Digikey only sells a 10k digital pot, I was hoping to find a >smaller > > > > >one,like <= 1k, anybody know where I could get one ? > >Is their an easier way to do this with a PIC ? > >I already looked at the Sharp GP2D02, but I wanted someting cheaper. > > > >Thanks in advance, > > Kevin > > > >P.S. I am a programmer not an EE, so my electronics background is >limited. > > > > >-- > >http://www.piclist.com hint: The PICList is archived three different > >ways. See http://www.piclist.com/#archives for details. > > > > > >*** > >The information in this e-mail is confidential and intended solely for >the > > >individual or entity to whom it is addressed. If you have received this > >e-mail in error please notify the sender by return e-mail, delete this > >e-mail, and refrain from any disclosure or action based on the >information. > > >**** > > > > > >-- >http://www.piclist.com#nomail Going offline? Don't AutoReply us! >email listserv@mitvma.mit.edu with SET PICList DIGEST in the body > > _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body