Click on the auto route button on the left.  Under the GENERAL tab,
Preferred Directions make the unusable layer "N/A" (not available) and
the other "*" (any direction.)

  There is also a new group that is specifically for Eagle users
news.cadsoft.de  Under that the newsgroups are
  eagle.support.eng
  eagle.userchat.eng

  They are a great resource for question, and answers, about the Eagle
product.

Phil


Tal Bejerano - AMC wrote:
>
> Hi All
>
> How should I set the eagle program to auto route only one-side pcb and not
> double-sided pcb? I can't find any command for that and I cannot etch
> double-side.
>
> Helppppppppppp
>
> Tal
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics

--
---------------------------------------------------------------
     Those who agree with us may not be right,
     but we admire their astuteness.
            - Cullen Hightower -
---------------------------------------------------------------

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics