To Solider this IC you need to first solider the IC to the board with a
standard iron the apply plenty of wet flux then remove the excess solider
from the IC with a con caved solider tip. Practise on a spare IC first, but
it is not so difficult.

>Hi there!
>
>
>I will appreciate any help from an experienced lister about techniques for
>manual soldering this kind of chip.
>I got experience on manual soldering of some types of SMD IC's (using
>Chem-Wik rosin), but this one has a *very little* space between pins.
>
>The mechanical specs are:
>
>* Package: 144 pin (4x36 pin) LQFP (Low-profile QFP)
>* Distance between center of pins: 0.5 mm.
>* Pin width: 0.17 mm.
>
>
>Probably it can be done using flux or solder paste, but i have no detailed
>idea about application of these techniques.
>
>And yes, the chip is available only with this package...
>
>
>Best Regards,
>
>S.-
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics