I use soldering paste and a heat gun

Amaury

On Wed, 2001-12-19 at 01:24, Sebastian Garcia wrote:
> Hi there!
>
>
> I will appreciate any help from an experienced lister about techniques for
> manual soldering this kind of chip.
> I got experience on manual soldering of some types of SMD IC's (using
> Chem-Wik rosin), but this one has a *very little* space between pins.
>
> The mechanical specs are:
>
> * Package: 144 pin (4x36 pin) LQFP (Low-profile QFP)
> * Distance between center of pins: 0.5 mm.
> * Pin width: 0.17 mm.
>
>
> Probably it can be done using flux or solder paste, but i have no detailed
> idea about application of these techniques.
>
> And yes, the chip is available only with this package...
>
>
> Best Regards,
>
> S.-
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads