> Forgot to say earlier...  you CAN get adapters to connect a VGA monitor to
> the 13W3 connector.  I've been told you have to have a multi-sync monitor,
> but I have tried several from old standard VGA to a new sync-anything 17",
> and have not yet had a single one work with one of those adapters on a Sun
> workstation.
>

I remember when I used to play with a sun 19" monitor off my spac 2 (the
sparc was a boat anchor) but the monitor (once I got the cable right) worked
like a dream, unfortunately the work bench fell off the platform (angry
customers are great) (my office was above someone else's in a big factory
unit and our office was on their chipboard ceiling, and had a lighting rig
stopping it from falling off the edge, but when it was needed it was not
their (it was at ground level ready for me to reload it ) and the workbench
and computers hit the ground) Luckily no customer gear was on the bench
(clay paky GS1's were not cheap back then )

Regards,

Kat.

____________________________________________________________________________
 /"\   ASCII Ribbon Campaign  |        K.A.Q. Electronics
 \ / - NO HTML/RTF in e-mail | Software and Electronic Engineering
 X  - NO Word docs in e-mail  |      Perth Western Australia
 / \                                            |        Ph +61 419 923 731
____________________________________________________________________________

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu