Try:
http://www.allelectronics.com/cgi-bin/category.cgi?category=100&type=store

they have lots of stuff!

Tal

-----Original Message-----
From: pic microcontroller discussion list [mailto:PICLIST@MITVMA.MIT.EDU]On
Behalf Of David VanHorn
Sent: Saturday, December 15, 2001 11:55 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Step motor controllers


I'm looking for a chopped bridge driver, preferrably a dual, for use with
low voltage (6V-8.5v) motor supplies.

Everything I've found so far wants at least 10V, but I don't have 10V to
give!
--
Dave's Engineering Page: http://www.dvanhorn.org

Got a need to read Bar codes?  http://www.barcodechip.com
Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and Bookland, with
two or five digit supplemental codes, in an 8 pin chip, with NO external
parts.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.