On Wed, 2001-12-12 at 04:16, x wrote:
> Hello Picers,
>
> I've got some 10" 24 Bits TFT displays (Philips/FPD 112) they're 800x600.
> Is there anybody who can advise me how to interface this to a PC or Single Board Computer?
> I've got a Pre-Engineering card (isa) it has a chips 65545 Chipset, but the BIOS is programmed for 640x480 LCD so not the full Display is adressed.
>
> Maybe anybody knows how to extrace timing information out of the 65545 Bios?
>
> Any help on this topic is welcome!
>
> Thanks in advance,
>  Joep Schroen
>  pd3rog@gmx.net

There should be some required information in the source for the Linux
Frame Buffer driver ;)
Now, how to connect the LCD to a single board computer, that's another
matter. Usually, these things are digital panels, so the pixels are sent
in a digital protocol to the LCD.
BTW, how much would you ask to sell me one of those ?

Sincerely
Amaury

>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu