Hi to all engineers,

I need to generate 4 pulses at the same time with
Different timing and based on battery voltage if
The voltage does lower then +12 v duty cycle (on time)
Must be changed go lower then 50%.



              |--------------------|                    |------
______________|                    |____________________|

______________                      ____________________
              |                    |                    |
              |--------------------|                    |------


---------------------|                    |--------------------|
                     |____________________|                    |
                      ____________________
                     |                    |                    |
---------------------|                    |--------------------|




this is how I am thinking to do it. Find out about the frequency first
then based on that generate interrupt on every rising or falling edge
then use one of the timer to control on time thru ADC or maybe it is
better to use tables instead. Any help will appreciated

Andre

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body