What about a 18Fxxx device?=20

I'm thinking to start a PIC project and need a RS232 (as a console =
port) and
a RS485 (small network to other PIC card's) interface with a I2C.

Any comments to that?



Best regards


Ole Andreas Gl=F8ersen
LA9SHA

mailto:ole.andreas.gloeersen@lv.no




-----Opprinnelig melding-----
Fra: Andre Abelian [mailto:engelec@EARTHLINK.NET]
Sendt: 5. desember 2001 18:14
Til: PICLIST@MITVMA.MIT.EDU
Emne: Re: PIC with 2 serial ports


Hi.

I am working on similar project with 16f873 that I needed 2 uart one
Of them goes thru max232 19200 buad rate and the other one just receive
data at 9600 Buad rate. Since I am using i2c bus too to communicate =
with
24lc128
Eeprom I decided to use max4599 multiplexer which has 2 input one =
output
And control pin. In my application 2 uarts never going to work together
So having multiplexer to switch back and forward works for me. If you
figured it out different method other then spi or what I did please
Let me know maybe you are going to find better way of doing it.
Hope this helps

Andre Abelian

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads