I saw a page where some students connected a 802.11b card to a microcontroller (don't know which one), to transmit water temperature data from a buoy. You may be able to contact him/them.

The site is at
http://wireless.oldcolo.com/biology/progress2000/13-progressreport(07-07-2000).htm

At least you know it can and has been done...

And with using the source code for some linux drivers, that still wouldnt give you pin-outs and how to interface to the actual pcmia connection. Did you try contacting someone at one of the card developers...you might be able to get some info, or at least pointed in the right direction.

-
end


--- David VanHorn <dvanhorn@CEDAR.NET> wrote:
>So, taking back my thread... :)
>
>Does anyone know of a low level description of how to talk to these cards?
>Pinout descriptions would be helpful.
>
>At this point, I'm assuming it's some sort of bus with read, write, int etc .
>--
>Dave's Engineering Page: http://www.dvanhorn.org
>
>Got a need to read Bar codes?  http://www.barcodechip.com
>Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and Bookland, with
>two or five digit supplemental codes, in an 8 pin chip, with NO external parts.
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

_____________________________________________________________
Get your free email here at http://www.e-ha.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu