Hi,

Vasile Surduncan wrote:
<snip>
>However, the whole theory is shadowed by the instability of the
>count_per_degree and count_remain values.
>As many readings, as many values at the same temperature.

I'm curious, how much flucatuation are we talking about ?
Assuming you had the 0.5 degrees stable prior to trying to
extend it to 0.1 degrees, the unstability ( i.e. noice etc. )
should be less than 0.5 degrees.
If you have higher fluctuations then you have to look for other causes,
you are using one-shot mode ?

In this case I assume the an fairly small FIR should be of use,
let's say an average of 8 readings ? Would that produce 'better' results ?


/Tony

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.