Hi All,
        Just wondering if anyone has had any experience with the
ccs pic compiler on linux. I just recently purchased it and was
hoping to use it on a project, but I am having problems installing
the darn thing.

The version is 3.041. I'm running Redhat 7.0.
I've installed the software as explained in the Install file found on
the cd.  I've placed the compiler in /usr/local/picc.
In that directory I created the ccsc.ini file which contains
i="/usr/local/picc/devices:/usr/local/picc/drivers"
My work directory where my source code is located is found at
/home/mbogucki/projects
So for example, I copied ex_sqw.c to /home/mbogucki/projects.
In the projects  directory I would type:
/usr/local/picc/ccsc +fm ./ex_sqw.c

This would give me the following error
CCS PCM C Compiler
Registered to: VRIOtech, Inc., Michael Bogucki
Compiling: ex_sqw.c
in /home/mbogucki/projects/

Error[24]   /usr/local/picc/devices/16c74.h 2 : Error file not found. (18)

I've attempted to try

 /usr/local/picc/ccsc +fm ./ex_sqw.c
I="/usr/local/picc/devices:/usr/local/picc/drivers"

This gives me:

CCS PCM C Compiler
Registered to: VRIOtech, Inc., Michael Bogucki
Compiling: ex_sqw.c
in /home/mbogucki/projects/

Error[24]   /usr/local/picc/devices/16c74.h 2 : Error file not found. (18)

Any assistance would greatly be appreciated.

--|\/| | |< E

The most exciting phrase to hear in science, the one that heralds new
discoveries, is not "Eureka!" (I found it!) but "That's funny ..."
                -- Isaac Asimov

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.