I stands for Industrial, as in Industrial temperature range.

Martin

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Rudy Rudy
Sent: 03 December 2001 19:33
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: Difference between 16F628-20/P-ND and 16F628-20I/P-ND???


Ooops!  PIC should be all caps!

Does anyone know the difference between 16F628-20/P-ND and
16F628-20I/P-ND?  One with the 'I', the other one without it.  I saw
this in Digikey website.

I am a little confused because the one with the 'I' is a little more
expensive than the other, and I can't seem to find any difference
whatsoever in the description of the 2 chips.  I have checked microchip
website and the spec sheet, and I can't find anything.

In the spec sheet, it says that there are 2 types: 16F and 16LF (where
the LF version is the one that'll work at lower supply voltage).  But I
don't think this is it though!

Please enlighten me if anyone knows what the 'I' stands for.  Thank you
very much!


 Rudy

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics