I'm interested too. Please Cc.
Thanks,
Cristian

At 11/30/2001, you wrote:
>I made such a project a few years back... been in daily use for years.
>Its a 2 channel setup as in 2 doors. I'll check if the files are easily
>accessable if so then i can send you :
>-Working asm source
>-OrCad schematics, possibly as pdf
>-OrCAD pcb layout
>
>I'll mail you the whole shebang offliist :-)
>
>Best regards
>Datech, Sweden
>Patrick J
>
>
>----- Original Message -----
>From: "Milan Pavlica (YU7AEC)" <mpavlica@PTT.YU>
>To: <PICLIST@MITVMA.MIT.EDU>
>Sent: Friday, November 30, 2001 1:31 PM
>Subject: [PIC]: IR remote control
>
>
> > Hello PICers!
> > I have universal IR remote control and i would like to make receiver
> > with PIC for it.
> > Output must be with relay - i will control contactors for opening
> > garage.
> > Code which i will transmit isn't matter - it would be nice if I can
> > program it in source code of PIC
> > Any suggestions, schematics, sources are welcomed...
>
>--
>http://www.piclist.com hint: The PICList is archived three different
>ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.