I usually get this message when the PIC crystal is not oscillating. Friendly Regards Octavio Nogueira =================================================== nogueira@propic2.com ICQ# 19841898 ProPic tools - low cost PIC programmer and emulator http://www.propic2.com =================================================== ----- Original Message ----- From: "Arnold Chord" To: Sent: Friday, November 23, 2001 9:50 PM Subject: [PIC]:Error Performing Requesting Operation > Hello, > I am trying to get my ICD working and I get : Error Performing Requesting > Operation. > The ICD Help says that it is the com port. > I have set the FIFO on and off. I have set the port flow contrion fron > xon/xoff to hardware to none. > Nothing seems to work. > Any ideas out there. > The system seems to see the ICD. At least when I turn the power off to it > Mplab complains. > I am running win98 on a 733 mHz system. > Help please. > Arnold > achord2@home.com > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics