of course, I gave you by mistake a wrong address. The correct one is:

http://www.geocities.com/vsurducan/electro/micro/micro.htm

Thank's for good thoughts. I will take a look at your AN.
Vasile

On Mon, 12 Nov 2001, Harold M Hallikainen wrote:

>         Yahoo returns a page not found error on that link. These are not in
> harsh industrial environments. Even in such environments, if you are
> measuring pots on the board, I  think noise pickup would be minimal. It's
> wires leaving the board that do a great job picking up noise. I DO filter
> everything leaving a board.
>         On schematics and stuff...  They pay me real money to design this stuff,
> so I don't think I should give away the designs. I'm certainly happy to
> discuss the designs, though. I do plan on adding an "Engineering
> Department" page to the website. I'll get into some discussion of phase
> control dimming, DMX, etc. My wife just gave me an Etch A Sketch for my
> birthday. She's really good at using it. I hope to have her draw some
> waveforms for inclusion on the page (complete with the Etch A Sketch red
> background, the knobs, etc.) Should be fun!  Meanwhile, I DID add stuff
> on a presentation on neutral currents with phase control and GFCI's I did
> at LDI. Look under Application Notes at http://www.dovesystems.com .
>
> Harold
>
> On Mon, 12 Nov 2001 10:15:17 +0200 Vasile Surducan
> <vasile@L30.ITIM-CJ.RO> writes:
> > And which kind of signals have you measured ?
> > Are your devices working in harsh industrial environement like this
> > one:
> >
> > http://www.geocities.com/vsurducan/micro/micro.htm
> >
> > Harold, your devices look great, I've saw your site. Prity bad you
> > don't
> > say nothing about how it works ( schematics, sample codes etc...)
> > Best regards,
> > Vasile
> >
> > On Fri, 9 Nov 2001, Harold M Hallikainen wrote:
> >
> > > On Fri, 9 Nov 2001 14:35:14 +0200 Vasile Surducan
> > <vasile@L30.ITIM-CJ.RO>
> > > writes:
> > > > Datasheet say 10K. But reality show you need to minimize the ac
> > noise
> > > > impedance by adding a capacitor near AD input and analogic
> > ground.
> > > > Value must be set accordingly input signal variation and maximum
> > > > delay
> > > > ( Rpot x C ) you must have it.
> > > > Vasile
> > > >
> > >
> > >         Why? I've got lots of stuff with a 10K pot driving the A/D
> > input
> > > directly with no capacitor and get no jitter in the A/D output. If
> > you
> > > have a reasonable PCB layout (good ground plane), it seems this
> > capacitor
> > > is just wasted money. And, if you do external multiplexing, slows
> > > everything down.
> > >
> > >
> > > Harold
> > >
> > >
> > >
> > > FCC Rules Online at http://hallikainen.com/FccRules
> > > Lighting control for theatre and television at
> > http://www.dovesystems.com
> > >
> > > ________________________________________________________________
> > > GET INTERNET ACCESS FROM JUNO!
> > > Juno offers FREE or PREMIUM Internet access for less!
> > > Join Juno today!  For your FREE software, visit:
> > > http://dl.www.juno.com/get/web/.
> > >
> > > --
> > > http://www.piclist.com hint: The list server can filter out
> > subtopics
> > > (like ads or off topics) for you. See
> > http://www.piclist.com/#topics
> > >
> > >
> >
> > --
> > http://www.piclist.com hint: To leave the PICList
> > mailto:piclist-unsubscribe-request@mitvma.mit.edu
> >
> >
>
> FCC Rules Online at http://hallikainen.com/FccRules
> Lighting control for theatre and television at http://www.dovesystems.com
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads