At 12:03 PM 10/22/01 -0400, you wrote:

>        As far as I can tell there is no path to ground other then the
coolant. All
>the mounting points are either plastic or rubber, and all the lines are
>rubber, that is what has confused me. I measured the coolant and it is kinda
>conductive. Thanks, TTYL

Maybe there is a 0.125" spade connector on the rad somewhere for a ground
wire...

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
      /.-.\
     (( * ))
      \\ //     Please help if you can:
       \\\      http://dailynews.yahoo.com/fc/US/Emergency_Information/
      //\\\
     /// \\\
     \/   \/

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu