They only have 2 IO as the smart cards themselves can only have this also. Most smart cards have one IO! Its the nature of the beast. R. >> Only having RB6/7 seems >> to be quite >> limiting. >> David >> Richard Sloan wrote: >> > Wish I could get this card working with some serial comms, I got lots of >> apps for it. >> > >> > I was it at www.mp3kit.com under poducts/thin cards >> > >> > You only get a couple IO in the card. >> > >> > >> Are they already defined in conio.h ? >> > >> > >> At 09:39 PM 10/28/2001 +1300, you wrote: >> > >> >>>> >> > >> Hi all, I have finally found time to return to the PIC project I >> started >> > >> a >> > >> month or two back. I am trying to build a motor (hobby servo) >> controller >> > >> using a PIC 16F84 and Hi Tech C. I have struck a wall trying to >> get >> > >> software UART working on my 16F84. I am trying to use some code >> > >> (attached) >> > >> that I downloaded from http://www.workingtex.com/htpic/ which I >> have >> > >> found to be an excellent reference site for a beginner like=20 >> myself! The >> > >> problem I am having is that when I try to compile my project I get >> the >> > >> following error message. serial.obj:12:multiply defined symbol: >> _getch >> > >> (coms.obj) (error) >> > >> serial.obj:12:multiply defined symbol: _putch (coms.obj) (error)=20 >> I have >> > >> a >> > >> feeling it is probably something really simple and I just haven't >> figured >> > >> out this compiler yet ;-) Thanks for any help and suggestions, >> regards >> > >> James Fitzsimons >> > >> Attachment Converted: "C:\APPS\Eudora\Saber5\Attach\serial.c" >> > >> > >> -- >> > >> http://www.piclist.com hint: To leave the PICList >> > >> mailto:piclist-unsubscribe-request@mitvma.mit.edu >> > >> > -- >> > http://www.piclist.com hint: To leave the PICList >> > mailto:piclist-unsubscribe-request@mitvma.mit.edu >> -- >> http://www.piclist.com hint: To leave the PICList >> mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu