I did some work using a 16F84 PIC and the DS1820, using Hitech C. It is
basic stuff but I didn't really come across any traps. If you are
interested I can send you some of the code.

Regards,

Graham Cheetham
Telecasters Australia Ltd.



-----Original Message-----
From: John Walshe [mailto:John.Walshe@INPACTMICRO.COM]
Sent: Saturday, October 20, 2001 1:44 AM
To: PICLIST@MITVMA.MIT.EDU
Subject: [PIC]: dallas one wire interface


Before I go writing one, has anyone already written a module (C
preferably)
to talk to dallas devices via the 1-wire interface. I'm about to use a
DS2438 smart battery monitor for its temperature sensing capability(plus
a
few other bits which I may  use also). Are their any known "Gotchas"
that
people have come across with this interface.
Yes the [PIC] angle : I'm using a 16F876 to control the DS and to do a
lot
of other stuff!
Best regards,
    John
PS I'm away for the weekend so I won't be able to answer any possible
questions before Monday.
***************************************************************
John.Walshe@inpactmicro.com

INPACT MICROELECTRONICS (Irl) Ltd
21A Pouladuff Road,
Cork,
Ireland,

Tel: +353 21 4318296
Fax: +353 21 4318980

WWW.INPACTMICRO.COM
***************************************************************

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body