Hi,

I have a standard ascii LCD display with two lines, backlit etc, with the
14 pin 2x7 connector (for cables). The LCD board has pins 1 and 14 marked.
This is not very usefull since I do not know for sure whether the pin
order is:

A)
1  2
3  4
5  6
7  8
9  10
11 12
13 14

or B)

1  8
2  9
3 10
4 11
5 12
6 13
7 14

Notice how pins 1 and 14 are in the same position in both cases ;-(. No I
cannot ask the manufacturer, I bought these in a shop.

If any1 can  shed some light on this, please do, tia,

Peter

PS: Is there a way to find out by measuring ? I tried comparative
measurement vs. gnd etc but nothing conclusive came of it. The controller
is epoxy splotch chip on board type so I can't check wires to pins.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads