What the Tiger is doing is to have a image of the LCD in memory, do all the tracing in memory and them dump the whole screen to the LCD. Friendly Regards Octavio Nogueira =================================================== nogueira@propic2.com ICQ# 19841898 ProPic tools - low cost PIC programmer and emulator http://www.propic2.com =================================================== ----- Original Message ----- From: "Tim Thompson" To: Sent: Friday, October 19, 2001 3:19 AM Subject: [OT]: Need fast draw routine for T6963C based lcd...anyone? > Hello all, > > I am wondering if anyone out there has ever messed with trying to get a > decent frame rate from a Toshiba T6963C based graphical LCD display. I am > in need of a routine > to do just that.. > > For some background, my project consists of a 240x64 LCD controlled by a > PIC14F877 with a serial interface to a PC. The PC software does all the > real dirty > work, and the PIC is an interface to the LCD and all the other on-board > crap, so if anyone has a C function that does the graphical drawing, that > would be ideal. > > The most I have gotten out of any T6963C based lcd is 2fps, and thats using > automode-write. It looked really bad because you could watch it go down the > lines drawing the image. > I have however seen one company that makes a module that goes between the > LCD and computer, that claim will do full motion video to be > streamed on the LCD. So it sounds possible to do. The URL for this is at: > http://www.wilke-technology.com/ttiger.htm > > Anyway for more detailed background you can visit: > http://www.irule.net/projects/carlcd > > Thanks again, > Tim Thompson > > > > - > Remember, 'kill' doesn't kill processes, users kill processes. > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads