Take a look for example in PIC16F628 datasheet ( DS40300B) pag. 99
and table 14-4 at page 102. I think is clear enough.
 Regards, Vasile

On Tue, 16 Oct 2001, Banu Prakash wrote:

> Hello,
>  Can anyone please elaborate on Cold and Warm Reset.
> thanks in advance,
> banu.
>
> Peter Tran wrote:
>
> > Repost, please response if you know where I can buy some inexpensive
> > conductivity sensors used to monitor the quality of drinking water. Thanks.
> >
> > Peter
> >
> > ----- Original Message -----
> > From: "Peter Tran" <ltran@NETZERO.NET>
> > To: <PICLIST@MITVMA.MIT.EDU>
> > Sent: Monday, October 15, 2001 10:40 AM
> > Subject: [PIC]: TDS or conductivity sensor
> >
> > > I'd like to build a TDS meter using a PIC. Could someone please tell me
> > > where I can find out some inexpensive conductivity sensors for this
> > project?
> > > Thanks for your help.
> > >
> > >  Peter
> > >
> > > --
> > > http://www.piclist.com hint: The list server can filter out subtopics
> > > (like ads or off topics) for you. See http://www.piclist.com/#topics
> > >
> > >
> > >
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body