Hello Luis,

some months ago I got two displays (128 x 128 pixel) with the LC7981
display controller,too.

I've attached the Qbasic samples I made. The controller was a bit
tricky, it took me about 2 days to get the first results in the
gfx-mode and another day for the textmode.

Just have a look at the sources. I'm sorry that there is few comments
in the source (none to be true), but I think with the datasheet and
the source the initialisation should become clear.

The source is for the a display connected to the lpt-port of a pc, the
file display.txt contains the information which pin of the LC7981 has
to be connected to which pin of the lpt.

If there should be any problems with the attached files just ask.

Greets,
       Michael

a> Hello all,

a> I've been spending time trying initialize a 128x128
a> Graphic LCD basead in Sanyo controller LC7981.
a> I did not get good results yet.
a> Somebody have been working with that controller and could help me
a> or give me a exemple how initialize it?
a> Thanks in advanced,

a> Luis Fernando.

a> --
a> http://www.piclist.com hint: The PICList is archived three different
a> ways.  See http://www.piclist.com/#archives for details.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.