A wild guess, but does your software say it supports NT? TTYL.

> The programer I got from amazon electronics. It's model 96. The PC is a
> laptop running NT. Software is picallw. There is a hardware check built in
> the software for pic16's and kit number 96.
>
> attached is my asm file. I don't understand what you mean by if
> the address
> >0
>
> Thanks.
>
> Erik
>
> -------
>
> I assume that the programmer is a commercial one, i.e. you bought it?
> Usually
> those errors either mean there is a wiring problem somewhere (or a timing
> issue with software originally designed for older computers) or (if the
> address > 0) the hex file (or config word inside it) is wrong for the PIC
> you
> are programming.
>
> Erase/blank always appears to work (it doesn't need to verify it).
>
> I struggled with this for a while with the NOPPP (search on
> google for it :)
> until I got all the wiring sorted and delayed the program a bit.
>
> Is there any kind of test mode for your programmer device?
>
> Regards,
> Dennis
>
>
>
>
>
> > Thanks
> >
> > Erik
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads