----- Original Message -----
From: Bob Ammerman <rammerman@ADELPHIA.NET>


> The default is "A/D" on for a very good reason. At powerup, if the pin
were
> connected to an analog signal but configured as a digital input then there
> would be excessive Idd current because the input was not solidly high or
> low.

That makes sense- I think.  Do the inputs of TTL gates really create that
much of a drain in mid-state?  That is all I can see that might cause such a
problem.

Jeff

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu