>I'm looking for a 120VAC 60Hz to 650VAC transformer, with as high an
amperage as possible up to 2.5 >amps output, 150mA at the bare minimum.
This will be used in a power supply for a pulsed Nd:YAG >laser.  I would
prefer a new transformer as opposed to an old one from vacuum tube
electronics.

Do you really need AC out? I would suggest getting a suitable isolation
transformer, say 3KVA, like you would use for power tools, and then have a
voltage multiplier rectifier arrangement on the output.

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu