>Basically my WAIT Circuit will INH  the CPU CLOCK and
>stop the DATA TRANSFER COLD, until the EPSON Part is
>READY to I/O Data.
>
>Dan Marchesani

One problem you may have is if you stop the clock asynchronously.
If the pulse has just happened to go high and your gate makes
it low, that is a narrow pulse and you will have in effect just
given it a clock signal much higher than it is rated for.  That
could crash it.

Barry

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu