The thing is that I am trying to test some gas tubes suppresors of 75V from
sankosha, what I was trying to use is a keithley source configured as
current source and supplying a DC current of 5mA to the component and
measuring the voltage at the terminals of the component, and the the result
I obtain was that the voltage at the terminals of the components doesnt
stabilizes around 70Vdc, what I don't really know is if this behavior is
normal. Regards

> -----Mensaje original-----
> De:   Douglas Butler [SMTP:dbutler@IMETRIX.COM]
> Enviado el:   Wednesday, September 26, 2001 8:22 AM
> Para: PICLIST@MITVMA.MIT.EDU
> Asunto:       Re: [ot]: MOV testing
>
> What do you want to know?  I did a little testing about ten years ago
> when I needed a reliable way to blow a slow blow fuse when a power
> supply was mis-wired.  I tried MOVs but ended up with a gas tube.
>
> Sherpa Doug
>
> > -----Original Message-----
> > From: Osuna, Julio [mailto:JOsuna@LEVITON.COM]
> > Sent: Wednesday, September 26, 2001 11:14 AM
> > To: PICLIST@MITVMA.MIT.EDU
> > Subject: [ot]:
> >
> >
> > I guys, I wonder if someone of you has information or
> > something related
> > about testing of the clamping of ,MOV's, Sidactors, and gas tubes
> > supressors, Regards Julio Osuna
> >
> > --
> > http://www.piclist.com hint: The PICList is archived three different
> > ways.  See http://www.piclist.com/#archives for details.
> >
> >
> >
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.