Bummer. But I understand. Thanks for the reply though. Regards, Jim > As a mater of fact it's working already, but it > will be a commercial product so I can not release > the source code. > > > Friendly Regards > > Octavio Nogueira > =================================================== > nogueira@propic2.com ICQ# 19841898 > ProPic tools - low cost PIC programmer and emulator > http://www.propic2.com > =================================================== > > ----- Original Message ----- > From: "Jim Paul" > To: > Sent: Monday, September 24, 2001 12:47 AM > Subject: Re: [OT]: FAT question > > >> Octavio, >> >> I was working on a similar interface, but had to stop due to other >> priorities. Keep me informed of what you have and are doing. Maybe >> I can offer some assistance to you if needed. I'd like to be able to >> use your final product in a project of mine. If it work, and I think >> it will, I'd like to write it up in a magazine article for all to >> use. Let me know if you would consider doing this. >> >> >> Thanks and Regards, >> >> Jim >> >> >> >> >> >> >> >> >> >> >> >> > I'm developing a serial interface to CompactFlash >> > cards, it will accept RS-232 serial commands to >> > create files and store data from a PIC or other >> > microprocessor. >> > My question is: do I need to support FAT32 or >> > just FAT12 and FAT16 are ok? >> > The user will be able to open the created file >> > on any PC with a standard CF reader. >> > >> > Friendly Regards >> > >> > Octavio Nogueira >> > =================================================== >> > nogueira@propic2.com ICQ# 19841898 >> > ProPic tools - low cost PIC programmer and emulator >> > http://www.propic2.com >> > =================================================== >> > >> > -- >> > http://www.piclist.com hint: PICList Posts must start with ONE >> > topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other >> > [BUY]:,[AD]: ->Ads >> >> -- >> http://www.piclist.com hint: PICList Posts must start with ONE topic: >> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads >> >> > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads