As a mater of fact it's working already, but it will be a commercial product so I can not release the source code. Friendly Regards Octavio Nogueira =================================================== nogueira@propic2.com ICQ# 19841898 ProPic tools - low cost PIC programmer and emulator http://www.propic2.com =================================================== ----- Original Message ----- From: "Jim Paul" To: Sent: Monday, September 24, 2001 12:47 AM Subject: Re: [OT]: FAT question > Octavio, > > I was working on a similar interface, but had to stop due to other > priorities. Keep me informed of what you have and are doing. Maybe > I can offer some assistance to you if needed. I'd like to be able to > use your final product in a project of mine. If it work, and I think > it will, I'd like to write it up in a magazine article for all to use. > Let me know if you would consider doing this. > > > Thanks and Regards, > > Jim > > > > > > > > > > > > > I'm developing a serial interface to CompactFlash > > cards, it will accept RS-232 serial commands to > > create files and store data from a PIC or other > > microprocessor. > > My question is: do I need to support FAT32 or > > just FAT12 and FAT16 are ok? > > The user will be able to open the created file > > on any PC with a standard CF reader. > > > > Friendly Regards > > > > Octavio Nogueira > > =================================================== > > nogueira@propic2.com ICQ# 19841898 > > ProPic tools - low cost PIC programmer and emulator > > http://www.propic2.com > > =================================================== > > > > -- > > http://www.piclist.com hint: PICList Posts must start with ONE topic: > > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads