At 01:08 PM 9/20/01 -0500, Lawrence Lile wrote: >Well, I'm stumped on that one, Octavio. > >--Lawrence > >----- Original Message ----- >From: "Octavio P Nogueira" >To: "Lawrence Lile" >Sent: Thursday, September 20, 2001 11:47 AM >Subject: Re: [EE]: Eagle circuit board software > > > > Another thing, how do I put an SMD resistor on > > the solder side? I can only put it on the component > > side! You mean physically, or logically? Physically, use glue. I produce a bunch of boards that are thruhole on top, and SMD on bottom. Logically, in orcad, I can "flip" a component to the other side and back again. Other cad packages may require you to define the part on one side or the other, I can't say for sure. -- Dave's Engineering Page: http://www.dvanhorn.org I would have a link to http://www.findu.com/cgi-bin/find.cgi?KC6ETE-9 here in my signature line, but due to the inability of sysadmins at TELOCITY to differentiate a signature line from the text of an email, I am forbidden to have it. -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics