John,

I am afraid that you aren't missing anything.

Bob Ammerman
RAm Systems
(contract development of high performance, high function, low-level
software)

----- Original Message -----
From: "John Walshe" <John.Walshe@INPACTMICRO.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, September 18, 2001 6:39 AM
Subject: [PIC]:TMR0 time out on 12C50x


> Hi Folks,
>     I want to be able to interrupt(reset is what actually happens) a
12C50x
> on a timeout of TMR0. However in the spec sheet I don't readily see and
> combination of flags in the status register that would indicate this
> condition. Am I missing something or is it just not implemented in this
> processor and I have to poll TMR0 instead(yeuk).
>
> Thanks,
> John
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu