Ok, I have read most of the stuff I can on these LCD's.  Two Questions,

1.  Writing in 4bit mode, do I set E high, set the 4 databits, Set E low,
Set E high, set the remaining 4 databits (d3 - d0) then set E low?

2.  How can I Equate a variable to 4 bits of PortB?  If using 8bit mode I
would simply use:

LCD-DATA equ PORTB
then later:
movwf    LCD-DATA

So for 4 bit mode I need to be able to Equate LCD-DATA to PORTB (bits
4,5,6,7).  How do I do this?

Thanks, and sorry if the above is a bit jumpled and makes no sense...

JP.

----- Original Message -----
From: "Bond, Peter" <PBond@TANDBERGTV.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Monday, September 17, 2001 9:11 AM
Subject: Re: [PIC]:LCD Daughterboard?


> Hi -
>
> > Hi, I am looking at making an LCD daughterboard using a 16F84
> > and a 2x16 LCD display.  There are two reasons,
>
> 2 wire LCD - http://www.rentron.com/Myke1.htm
>
> (Assuming it hasn't already been posted...)
>
> Peter
> This email, its content and any attachments is PRIVATE AND CONFIDENTIAL to
> TANDBERG Television. If received in error please notify the sender and
> destroy the original message and attachments.
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body