I don't know if this is what you want, but Joan Ilari has a nifty LCD &
keypad module to start from here:

http://www.terra.es/personal4/joan.ilari/lcd/lcd.htm

If you wanted it on some sort of two wire bus you would likely have to
make a PIC for it to convert the protocols.

The reason I think it is nifty is that eight wires is all that is needed
for basic input and LCD display, using the standard Hitachi LCD protocol
and cheap shift register chips, I don't think making a PIC interface
between an I2C or other serial link and the module would be that
difficult.

Also check piclist.com.

Jeff

----- Original Message -----
From: JP <piclist@MAILANDNEWS.COM>


> Sorry, I might not have explained, I want to make it not buy it.  I
was just
> wondering if anyone else had come accross code for such a thing that I
could
> look at as an example.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.