Alright, thanks very much.

I have already built a prototype PCB. Just waiting for it to be ready.

I am using a 32k on the RB6.7 so i can almost exact RT clock (actually 15sec pulse) without overloading the already overloaded Interrupt routine.
I have a program that the main routine is only GOTO $ !! (for future implementation), thats why i have all my needs inside the irupt routine.

I have tested this config on a protoboard, and it does not work. I have to unload RB6.7 of any external capacity.

Thanks
Sena





> I would build up a prototype PCB, even if it only catered for the ICSP
> connections and the circuitry around RB6/7. I'm sure that will give you
> a pretty good idea.
>
> Obviously having caps and a crystal connected to these pins will raise
> the capacitance of the data and clock lines which may cause timing
> problems.
>
> If you can say, I'm curious why you have a crystal oscillator on RB6/7!
>
> --
> Best regards
>
> Tony
>

*********************************************************
Antonio Sergio Sena     CT2GPW
asena@bigfoot.com

BEng Electrical & Electronic Engineering
Heriot-Watt University - Edinburgh

Homepage: www.qsl.net/ct2gpw
*********************************************************

Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics