Is it a dial-up SERVER or client?

you need to run the server on the pc.
you also need to assign the pc an ip you know...

$.02
andy
----- Original Message -----
From: "Rob Symmans" <robsymmans@Q-VIS.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Tuesday, September 04, 2001 8:05 PM
Subject: [PIC]: wwwPIC2 minor communication problem


> Hi Guys, I've constructed Vince Sanders wwwPIC2 project and am having a
> small problem talking to it. The following occurs:
>
> 1 Hardware connected to com2
> 2 Running win 2000 I have com 2 set up as a SLIP "dial up" connection.
> 3 I start the SLIP connection and see "OK" in the terminal window.
> 4 I start IE5 (connection set to default to SLIP on com2)
> 5 I try to connect to the hardware by placing the address 198....... (I
dont
> have the address with me) in the URL bar on IE5 etc.
> 6 Nothing happens.
>
> Using a CRO and viewing the com port via a montoring program I can see the
> port open and the "OK" message arrive but no further action occurs. It is
as
> if my browser is not trying to communicate via the com port. I dont get
the
> "page not found" error.
>
> I have used a 4MHz xtal, but changed the firmare to suit - the "ok"
returned
> suggests to me that the hardware is functioning ok.
>
> Any suggestions as to what I am doing wrong?
>
> thanks in advance
> Rob
> Australia.
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics