On Tue, 4 Sep 2001, Jim wrote:

>
> But the original author of this post *may* have had
> another application in mind ...
>
> Try eliminating a 'ground loop' caused by the firing of
> an airborne-RADAR magnetron sometime while trying to get
> a clean 100 millivolt 'pulse' (no PFN (Pulse Forming Network)
> after-ringing, 400 Hz power supply ground-loop effects,
> etc) out of a Hewlett-Packard (P424A) Ku-nand 'crystal'
> microwave (diode) detector ...
>
> Solution to this problem: a piece of paper and #6 screws for


  Not paper, but mylar ! Because the paper absorbe the moisture and acts
like an atenuator ...

Cheers, Vasile

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics