I draw diagrams with Eagle  www.cadsoft.de  which is available as freeware,
and then capture them off the screen with Capture Express
http://www.captureexpress.com , saving as a JPG or BMP.  Often I will also
reduce the size of the file and/or the number of colors to obtain maximum
compression (PICLIST does not allow large attachemnts)  with Graphic
Workshop  www.shareware.com    All this stuff is available as shareware or
freeware.  This beats ugly ASCII art all to pieces.  I hate ASCII art, since
I can never read it.

--Lawrence Lile

----- Original Message -----
From: "Steve Baldwin" <steve@TLA.CO.NZ>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Friday, August 31, 2001 6:50 PM
Subject: Re: [OT]: Bad art


> What was used to create some of the simple circuit diagrams that
> were attached as GIFs ?
>
> Any other suggestions for simple "how to wire it up" diagrams for
> documentation and mailing list discussions ?
>
> Steve.
>
>
> ======================================================
> Steve Baldwin                Electronic Product Design
> TLA Microsystems Ltd         Microcontroller Specialists
> PO Box 15-680, New Lynn      http://www.tla.co.nz
> Auckland, New Zealand        ph  +64 9 820-2221
> email: steveb@tla.co.nz      fax +64 9 820-1929
> ======================================================
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads