Try this one http://www.rof.net/yp/alphaone/activities/electronics/3c509b/ ----- Original Message ----- From: "Richard" To: Sent: Monday, September 03, 2001 7:13 PM Subject: PIC - TCP/IP / controller / relays / Bit of fun! > Hello all, > > I'm looking for some assistance in working on a small project, to keep me out of mischief while > living in London for a few years. > > What I wish to create is a PIC TCP/IP based board, that has the ability to be controlled entirely > by TCP/IP and perhaps rs232 for monitoring/test purposes. It will control a few 12 volt items > lets say turn on a led, or a little motor, and also have the ability to turn on/off a 240v load. > > So basically the board can be controlled by a standard PC, via TCP/IP or RS232 and it will allow > you to turn on and off a couple of relays for lights and motors, and also a 240 load on and off. > > I also do not believe in reinventing the wheel, so thought I'd put out some feelers to see what > others have done, maybe there are some do's and dont's also. Which particular PIC chip would be > the best to use for this kind of a device... id prefer to use the most power chip that i can for > future enhancement etc. > > I guess I'm kind of looking for a partner to work with remotely, or together on coming up with > prototype and to further the ideas and main idea for the devices use. > > I have seen a lot of the PIC based web servers, which could possibly be the core TCP/IP and > control system for the device. This will be a fun project to get into if anyone is interested. > > Thanks for your time! > > Richard. > > New Zealander trapped in London :( haha > > > > > > > > > > __________________________________________________ > Do You Yahoo!? > Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger > http://im.yahoo.com > > -- > http://www.piclist.com hint: To leave the PICList > mailto:piclist-unsubscribe-request@mitvma.mit.edu > > > -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu