----- Original Message -----
From: John Ferrell <johnferrell@SPRINTMAIL.COM>

> You say:
> [BTFSS    register, mask]
> It means Bit Test File, Skip if Set
>
>  The next instruction will be skipped if 'control,pin' is high. (logic
1
>  or set)
>
> Somewhere there is probably a list that says this about each
instruction but
> I have yet to find it. I should set myself down and do it, but I have
not
> given up hope of finding it. Maybe even in MicroChip's docs?

Um, yes.  The "midrange reference manual" has a section devoted to it,
and data sheets to individual chips also have such a page, and several
pages following are devoted to describing each instruction in detail and
providing examples.  There was also a handy folding card included with
the PICStart Plus programmer that works well as a handy quick reference.

Just to pull out an example, for the PIC16F84, data sheet "DS30430C",
section 9, page 56 has such a table describing every instruction, the
mnemonics, the opcode in binary, and what status flags are affected.
The page before and pages after are also useful as well.

Jeff

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics